" />
E-mail:sales@pepsenpu.com Call Us: +86 21 39900263
Economical & Innovative Polyurethane Solutions
You are here:Home > News

News

Mold design of casting polyurethane products
Views: 0 | Update Date: Mar 02 , 2021

Processing CPU elastomer products is inseparable from the mold. For processing methods such as normal pressure casting and pressure molding, which are often used, the requirements for molds are also different. For normal pressure open casting molding, since external pressure is not required, the strength of the...

Coloring of Casting Polyurethane
Views: 4 | Update Date: Feb 23 , 2021

CPU coloring   Adding coloring agent to polyurethane cast elastomer can make colorful products. In addition to giving people intuitive enjoyment, it can also play a role in shielding the darkening of color quality caused by the use of oligomer polyols and aromatic diisocyanates. The colorant can be...

Process selection of different polyurethane and metal bonding
Views: 35 | Update Date: Feb 01 , 2021

Process selection of different polyurethane and metal bonding   To make the product easier to remove from the mold, a release agent is required. Be extremely careful when using release agents. Generally, it is not recommended to use silicone oil. Avoid squeezing the release agent onto the...

Bonding of casting polyurethane and metal
Views: 45 | Update Date: Jan 27 , 2021

 In most polyurethane casting products such as rubber rollers, solid wheels, couplings, ceramic molds, liners, sieve plates, etc., the adhesion of casting polyurethane and metal is involved. Therefore, the problem of adhesion between casting polyurethane and metal must be solved in production. When bonding...

Potting and coating polyurethane products
Views: 50 | Update Date: Jan 19 , 2021

Potting and coating polyurethane products Because of its low viscosity and good fluidity, CPU can be cured at room temperature. In some areas, it gradually replaces brittle epoxy resin and low-strength silicone rubber with poor adhesion.   For example, the potting of the washing machine...

Pressure casting molding method and molded urethane products
Views: 71 | Update Date: Dec 30 , 2020

  The pressure molding method is suitable for mass production of products with stricter size requirements or the upper part is usually not flat. It is a commonly used method in the production of cast products. Inject the mixed rubber material into the mold, stay for a period of time, and close the mold...

Open casting molding polyurethane
Views: 82 | Update Date: Dec 22 , 2020

Open casting molding polyurethane   Open casting molding method is the simplest and most commonly used molding method. In this method, the mixture of prepolymer and chain extender is poured into an open mold preheated to 80-120°C and coated with a release agent. After normal pressure vulcanization...

Introduction of polyurethane lining
Views: 90 | Update Date: Dec 16 , 2020

There are many applications of CPU as lining of pipelines and equipment, such as lining of mud conveying pipeline, polishing machine lining, water pump lining, cyclone lining, ball mill lining, etc. The processing of the lining is generally made by pouring the lining object as the outer mold. The surface in...

Centrifugal molding method and polyurethane board (sheet) material
Views: 91 | Update Date: Dec 08 , 2020

Centrifugal molding method and polyurethane plate (sheet) material   This method is used to manufacture thin and complex shaped products. It can also be laminated, covered and composited to manufacture reinforced materials, such as lining cloth, fibers and steel wires in the mold to manufacture...

Open casting molding and urethane wheels
Views: 87 | Update Date: Dec 01 , 2020

  Urethane wheels give full play to the characteristics of urethane, such as high load-bearing capacity, wear resistance, high torsion modulus, and good adhesion to metal. Some PU rubber wheels have metal and non-metal cores in the middle, and some do not. Depending on the usage, the processing and...

Casting process and mold design of polyurethane roller
Views: 107 | Update Date: Nov 24 , 2020

  Polyurethane roller generally refers to a cylindrical product with a metal core in the middle and polyurethane outside. According to the purpose, it is divided into metallurgy, papermaking, textile, food processing, printing polyurethane roller, etc. Compared with ordinary rubber rollers,...

Several casting methods of custom molded urethane products
Views: 98 | Update Date: Nov 17 , 2020

Pouring is the process of pouring the mixed liquid polyurethane into the mold. In order to ensure product quality and increase the rate of product authenticity, correct pouring methods must be used. Commonly used pouring methods include vertical pouring method, inclined pouring method, bottom injection method...

Displaying 1 to 12 (of 88 news)